Product Center

超声波接近开关，M18圆柱形金属外壳，检测距离150-1000mm，模拟量输出4-20mA，IP67防护等级。

检测范围: 150 ... 1000 mm | 工作电压: 12 ... 30 V DC | 输出类型: 模拟量 4 ... 20 mA

Pepperl+Fuchs (P+F) Classic Series Flat Capacitive Proximity Sensors for non-contact detection of various materials in industrial automation.

Operating Principle: Capacitive Coupling | Operating Voltage: 10-30 V DC | Switching Frequency: ≤100 Hz

Uses modulated infrared light source with a detection range of up to 20 meters. Features PNP output, static fault warning, and selectable bright-on/dark-on modes.

Light Source: Modulated IR LED | Detection Range: 0...20m | Supply Voltage: 10...30V DC

High-precision positioning, presence detection, and high-speed counting of small metal workpieces for diverse industrial applications. Ideal for space-constrained automation equipment requiring direct cable connections.

Standard sensing distance (sn): 2 mm | Operating voltage: 10–30 VDC | Switching frequency: ≤3500 Hz

Ideal for locating, presence detection, and counting small metal parts in diverse industrial settings. Perfect for automation equipment requiring NPN output signals and direct cable connections.

Standard sensing distance (sn): 2 mm | Operating voltage: 10-30 V DC range | Operating temperature: -40°C ~ +85°C

Features M30×1.5 cylindrical threaded mounting, a PBT plastic housing, and an IP65 protection rating.

Measurement Range: 80～2000mm (Standard Target Board 100×100mm) | Operating Voltage: 10～30V DC (Reverse Polarity Protection) | Switching Frequency: ≤2.5Hz

Pepperl+Fuchs M30 Cylindrical Inductive Proximity Sensors for Industrial Metal Workpiece Position, Presence, and Limit Detection – Ideal for Space-Constrained or Harsh Environments

Standard sensing distance (sn): 15 mm | Output type: 3-wire DC PNP NO | Supply voltage: 10–30 VDC

Based on the EM4450 Titan chip, compliant with ISO/IEC 18000-2.

Operating Frequency: 125 kHz | Data Retention: 10 years at 55°C | Protection Rating: IP67 / IP68

电感式接近传感器，齐平安装，检测距离2mm，适用于金属物体的非接触式检测。

额定工作距离: 2 mm（齐平安装） | 工作电压: 10 ... 30 V DC | 输出类型: PNP，常开（NO），3线

带偏振滤波片的反射板型光电传感器，塑料外壳，检测距离5m，红光，灵敏度可调，PNP输出。

检测距离: 0 ... 5 m（极限7 m） | 工作电压: 10 ... 30 V DC | 输出类型: PNP，亮/暗通可调

M8直型A-code母头连接器，4针，可现场接线，适用于传感器/执行器电缆快速连接。

连接类型: 母头插座，M8 x 1，直型，A码 | 针脚数: 4 | 工作电压: 最大 30 V AC/DC

电感式接近传感器，齐平安装，检测距离4mm，方形塑料外壳，专为直接安装在标准执行器上设计

额定工作距离: 4 mm（齐平安装） | 工作电压: 10 ... 30 V DC | 输出类型: 2 x PNP，常开（NO），3线

单端M12直型母头连接电缆，A编码，2针，10米PUR蓝色护套，适用于NAMUR传感器连接。

连接器1: M12 x 1 母头，直型，A编码，2针 | 连接器2: 电缆尾部（开放端） | 工作电压: 最大 250 V AC/DC

弹簧钢联轴器，实现无齿隙旋转传输，高效隔振并补偿轴偏移

轴径范围: d1=6mm，d2=10mm | 最大转速: 3000 min⁻¹ | 最大扭矩: 1.5 Nm

弹簧钢联轴器，实现无齿隙旋转传输，高效隔振并补偿轴偏移。

轴径: d1 = 8 mm，d2 = 8 mm | 最大转速: 3000 min⁻¹ | 最大扭矩: 1.5 Nm

弹簧钢联轴器，实现无齿隙旋转传输，高效隔振并补偿轴偏移。

轴径: d1 = 10 mm，d2 = 10 mm | 最大转速: 3000 min⁻¹ | 最大扭矩: 1.5 Nm

方形电感式接近开关，非接触检测金属物体，PNP常开输出，齐平安装，检测距离15mm。

检测距离: 15 mm | 安装方式: 齐平 (bündig) | 工作电压: 10 ... 30 V DC

Cylindrical inductive proximity sensor, flush-mountable with a standard sensing distance of 1 mm; DC 3-wire NPN normally open output with a 2-meter fixed PVC cable for non-contact detection via metal eddy current effect.

Thread Size: M30×1.5, Flush Mount | Operating Voltage: 10–30 VDC | Operating Temperature: -40°C to +85°C

Enables non-contact detection via metal eddy current technology. Designed for space-constrained industrial automation and hazardous environments. Ideal for detecting metal workpiece presence, position, and limit switching. Meets SIL2 safety requirements.

Rated detection distance (sn): 2mm (flush-mount / shielded) | Operating voltage: 5~25V DC (powered through safety barrier / isolator) | Switching frequency: ≤1000Hz

Provides 4-20mA analog output and 2 programmable PNP switch outputs, suitable for a wide range of applications requiring reliable angle monitoring.

Operating Voltage: 10 ... 30V DC | Dimensions: 65×45×37mm | Weight: 240g

Universal infrared photoelectric sensor with built-in delay timer. Detects object presence via direct surface reflection without requiring a reflective plate.

Maximum Detection Distance: 2000mm | Light Source: Modulated IRED | Operating Temperature: -25°C ~ +55°C

Features an M30×1.5 threaded stainless steel housing with quasi-flush mounting. Rated sensing distance: 15mm. Suitable for hazardous areas and safety-related applications, achieving SIL 2 safety level.

Switching Frequency: 0 ... 450 Hz | Rated Voltage: 8,2 V (Ri approx. 1 kΩ) | Safety Integrity Level (SIL): SIL 2

Equipped with LoRaWAN wireless communication and Bluetooth 5.0 LE debug interface, powered by a high-capacity lithium battery.

Detection Type: Ultrasonic | Sensing Range: 250...4000 mm | Resolution: 1 mm

Features an L-shaped design with a 5mm fork width, 940nm infrared continuous light source, 2 NPN complementary outputs, and a flat connector. Optimized for detecting small parts.

Light Source: Infrared LED (94 nm continuous) | Operating Voltage: 5-24 V DC (Absolute Maximum: 4.75-27 V DC) | Connection Type: Flat Connector

Enables high-speed positioning, presence detection, and limit control for metal workpieces across diverse industrial applications. Ideal for harsh environments requiring frequent plug-and-play connections or limited space.

Uses MEMS micromachining technology with analog current output (4...20mA) and enhanced temperature resistance.

Vibration velocity measurement range: 0 ... 16 mm/s | Measurement accuracy: ± 0,1 mm/s | Operating voltage: 10 ... 30 V DC

For micro metal parts positioning, presence detection, and counting across various industrial applications; ideal for automation equipment requiring NPN output signals and direct cable connections.

Standard sensing distance: 2 mm | Output type: 3-wire DC NPN Normally Open (NO) | Switching frequency: ≤1500 Hz

Achieves stable metal detection via inductive coupling, ideal for industrial automation tasks like workpiece tracking, inventory management, and equipment control—especially in RFID applications with dense metal components.

Operating Frequency: 125kHz (0.125MHz) | Read Range: 0–100 mm | Dimensions: 80×40×80 mm

Designed for workpiece tracking, material management, and equipment control in industrial automation; compatible with IDENTControl evaluation units and supports integration of multiple industrial bus protocols.

Operating Frequency: 13.56 MHz | Read/Write Distance: 0–130 mm | Dimensions: 108.5×80×40 mm

Built-in yellow LED status indicator with reverse polarity and short-circuit protection. Ideal for metal object position detection, limit control, and counting in industrial automation. Reliable operation in harsh environments including oil, dust, and moisture.

Rated operating distance: 4mm | Output type: PNP Normally Open (NO) | Switching frequency: 0~2550 Hz

Designed for level high/low alarm and control of industrial liquid storage tanks, pipelines, and vessels. Unaffected by medium color, transparency, viscosity (≤1000mPa·s), or foam.

Tuning Fork Material: 316L Stainless Steel | Operating Voltage: 10~35 VDC | Operating Temperature: -40°C to +70°C

Detects position, presence, and limit of metal workpieces across various industrial scenarios. Ideal for harsh environments requiring frequent plug-and-play connections or limited space.

Standard sensing distance (sn): 10 mm | Operating voltage: 10–30 VDC | Switching frequency: ≤200 Hz

Equipped with 3 programmable function inputs and 3 programmable PNP outputs, designed for precise positioning and path tracking in AGVs, automated guided vehicles, conveyor systems, and other industrial automation applications. Features a robust, wear-free mechanical structure with a maintenance-free design for extended service life.

Reading Distance: 50~100mm | Max Throughput Speed: ≤8m/s | Power Consumption: 3W

Ideal for industrial applications including distance measurement, speed monitoring, collision avoidance, and level detection. Operates reliably in harsh conditions, unaffected by rain, snow, fog, dust, temperature fluctuations, or lighting variations.

Sensor Head: Bidirectional Rotatable | Operating Voltage: 9~30VDC | Sampling Rate: Up to 100Hz (Configurable)

Ideal for industrial automation applications including metal workpiece positioning, counting, limit detection, and collision avoidance. Non-contact operation ensures zero wear, maintenance-free performance, and extended service life.

Output Type: 3 Wire NPN | Operating Distance: 8mm | Switching Frequency: Up to 1350Hz

Ideal for industrial automation applications including metal workpiece positioning, counting, limit detection, and collision avoidance. Non-contact operation ensures zero wear, maintenance-free performance, and extended service life.

Rated operating distance: 8 mm | Switching frequency: up to 30 Hz | Operating temperature: -25°C to +70°C

Ideal for industrial automation applications including metal workpiece positioning, counting, limit detection, and collision avoidance. Non-contact design ensures zero wear, maintenance-free operation, and extended service life across diverse industrial control environments.

Rated operating distance: 15mm | Switching frequency: up to 200Hz | Operating temperature: -25℃~+70℃

Metal part positioning, counting, and limit detection for heavy equipment, automotive manufacturing, food & beverage, and other industries.

Switching Frequency: Up to 100Hz | Operating Voltage: 10～30VDC | Dimensions: 118×40×40mm

Uses electromagnetic induction for non-contact metal detection; ideal for harsh industrial environments and high-pressure washdown applications.

Rated operating distance: 20mm (flush mount) | Operating voltage: 10～30VDC | Switching frequency: up to 150Hz

Withstands high-pressure washdowns and extreme temperatures. Designed for high-speed production lines and harsh industrial environments. Ideal for metal workpiece positioning, counting, and limit detection.

Rated operating distance: 4mm | Switching frequency: up to 2.65kHz | Size: M12×1, overall length 50mm

Cylindrical inductive proximity sensor, non-flush mounting, contactless metal detection, PNP NO output

Dimensions: M12, Length 50mm, Nickel-plated Brass Body | Rated Sensing Distance: 4mm (Non-flush) | Output Type: 3-wire DC PNP Normally Open (NO)

M12 Cylindrical Inductive Proximity Sensor, Non-Flush Mount, PNP Normally Open, M12 Connector-Type Metal Non-Contact Detection

Housing Size: M12×1, Total Length 50mm, Brass with Nickel Plating | Rated Sensing Distance: 4mm (Non-flush Mount) | Output Type: 3-Wire DC PNP Normally Open

M12 Cylindrical Inductive Proximity Sensor, Non-Flush Mount, PNP Normally Open, Magnetic Field Immune, M12 Connector Type

Housing Size: M12×1, Overall Length 50mm, Brass with Nickel Plating | Rated Detection Distance: 7mm (Non-flush Mount) | Output Type: 3-Wire DC PNP Normally Open

M18 Cylindrical Inductive Proximity Sensor, Non-Flush Mount, NPN Normally Open, 5 m Cable, Non-Contact Metal Object Detection

Housing Size: M18×1, Overall Length 50mm, Brass Nickel-Plated | Rated Sensing Distance: 8mm (Non-flush) | Output Type: 3-Wire DC NPN Normally Open

M18 Cylindrical Inductive Proximity Sensor, Non-Flush Mount, 2-Wire AC Output for Contactless Metal Detection

Housing Size: M18×1, Total Length 40mm, Nickel-Plated Brass Housing | Rated Detection Distance: 8mm (Non-flush Mount) | Output Type: Two-Wire AC

M18 Cylindrical Inductive Proximity Sensor, Non-Flush Mount, PNP NO, Contactless Metal Detection

Housing Size: M18×1, Overall Length 50mm, Brass Nickel-Plated | Rated Sensing Distance: 8mm (Non-flush Mount) | Output Type: 3-Wire DC PNP Normally Open

M18 Cylindrical Inductive Proximity Sensor, Non-Flush Mount, NPN Normally Open, Contactless Metal Detection

Housing Size: M18×1, Overall Length 50mm, Brass Nickel-Plated | Rated Sensing Distance: 8mm (Non-flush) | Output Type: 3-Wire DC NPN Normally Open

M18 Cylindrical Inductive Proximity Sensor, Non-Flush Mounting, PNP Normally Open, Contactless Metal Detection

Housing Size: M18×1, Total Length 50mm, Brass with Nickel Plating | Rated Sensing Distance: 12mm (Non-flush Mount) | Output Type: 3-Wire DC PNP Normally Open

M18 Cylindrical Inductive Proximity Sensor, Non-Flush Mount, PNP Normally Open, M12 Connector-Type Metal Non-Contact Detection

Housing Size: M18×1, Total Length 50mm, Brass with Nickel Plating | Rated Sensing Distance: 12mm (Non-flush Mount) | Output Type: 3-Wire DC PNP Normally Open

M30 Cylindrical Inductive Proximity Sensor, Non-Flush Mount, NPN NO, M12 Connector-Type Metal Non-Contact Detection

Housing Size: M30×1.5, Overall Length 50mm, Brass with Nickel Plating | Rated Sensing Distance: 15mm (Non-flush Mount) | Output Type: 3-Wire DC NPN Normally Open

M30 Cylindrical Inductive Proximity Sensor, Non-Flush Mount, PNP NO, Cable Exit for Metal Contactless Detection

Housing Size: M30×1.5, Overall Length 50mm, Brass with Nickel Plating | Rated Detection Distance: 15mm (Non-flush Mount) | Output Type: 3-Wire DC PNP Normally Open

M30 Cylindrical Inductive Proximity Sensor, Non-Flush Mount, PNP NO, M12 Connector-Type Metal Non-Contact Detection

Housing Size: M30×1.5, Overall Length 50mm, Brass with Nickel Plating | Rated Detection Distance: 15mm (Non-flush Mount) | Output Type: 3-Wire DC PNP Normally Open

M30 Cylindrical Inductive Proximity Sensor, Non-Flush Mount, PNP NO, M12 Connector-Type Metal Non-Contact Detection

Housing Size: M30×1.5, Overall Length 50mm, Brass with Nickel Plating | Rated Detection Distance: 25mm (Non-flush Mount) | Output Type: 3-Wire DC PNP Normally Open

振动限位开关，音叉式设计，用于液体限位检测，坚固不锈钢外壳，适用于过溢保护或泵空转保护。

测量原理: 压电驱动音叉，频率变化检测 | 工作电压: 10 ... 35 V DC | 输出类型: 开关量输出，最大250 mA

Rectangular inductive proximity sensor, non-flush mount, 2-wire AC output, M12 connector for metal contactless detection

Housing Type: Rectangular L2 | Rated Detection Distance: 40mm (non-flush mounting) | Output Type: Two-wire AC

Rectangular inductive proximity sensor, non-flush mount, NPN NO, M12 connector-type metal non-contact detection

Housing: Rectangular L2 | Rated Sensing Distance: 40mm (non-flush) | Output Type: 3-wire DC NPN NO

L2 方形电感传感器，40mm 非齐平，三线 PNP 常开，M12 四针插接，IP68/IP69K 宽温金属检测

壳体类型: L2 方形 PA 塑料壳体 | 额定检测距离: 40mm（非齐平安装） | 输出规格: 三线直流 PNP 常开，M12×1 四针插头

U1K 方形电感传感器，40mm 非齐平，NAMUR 常闭，端子接线，可旋转感应头，防爆金属检测

壳体类型: U1K 方形玻纤增强 PA 壳体，螺丝端子接线 | 额定检测距离: 40mm（非齐平安装） | 输出规格: NAMUR 两线常闭，需配套防爆隔离放大器

M12 圆柱 NAMUR 电感传感器，2mm 齐平常闭，线缆出线，不锈钢壳体，高温防爆金属检测

壳体规格: M12×1 螺纹，总长 35mm 不锈钢外壳 | 额定检测距离: 2mm（齐平安装） | 输出规格: NAMUR 两线常闭，固定电缆出线，8.2V 额定电压

M12 圆柱电感传感器，4mm 非齐平安装，NAMUR 常闭输出，线缆出线，本安防爆金属检测设备

壳体规格: M12×1 螺纹不锈钢外壳，PVC 固定线缆出线 | 额定检测距离: 4mm（非齐平安装） | 输出规格: NAMUR 两线常闭，额定电压 8.2V，最高 1500Hz 开关频率

M12 圆柱 NAMUR 电感传感器，4mm 非齐平，SIL2 安全常闭，2 米硅胶线缆，IP68 本安防爆金属检测

壳体规格: M12×1 螺纹 PP 塑料外壳，2 米硅橡胶固定出线电缆 | 额定检测距离: 4mm（非齐平安装） | 输出规格: 带安全功能 NAMUR 常闭，SIL2 认证，额定电压 8V DC

M12 不锈钢圆柱电感传感器，4mm 非齐平，三线 PNP 常开，M12 四针插接，IP67 工业金属检测

壳体规格: M12×1 不锈钢外壳，总长 40mm，配套 2 颗锁紧螺母 | 额定检测距离: 4mm（非齐平无屏蔽安装） | 输出规格: 三线直流 PNP 常开，M12×1 四针连接器，供电 10~60V DC

M30 圆柱 NAMUR 电感传感器，15mm 非齐平常闭，2 米 PVC 线缆，SIL2 本安防爆金属检测

壳体规格: M30×1.5 不锈钢外壳，2 米 PVC 固定出线电缆 | 额定检测距离: 15mm（非齐平无屏蔽安装） | 输出规格: NAMUR 两线常闭，额定电压 8.2V，最高开关频率 100Hz

58mm 单圈绝对值编码器，13 位分辨率，PROFIBUS-DP 总线，空心轴 M12 插头工业位置检测

机身结构: 58mm 圆形法兰，10mm 贯通空心轴金属外壳 | 测量规格: 单圈绝对值，13 位高精度分辨率 | 通讯出线: PROFIBUS-DP 协议，M12 五针连接器接线

2mm 槽宽电感式槽形传感器，NAMUR 两线输出，SIL2 本安防爆，5kHz 高频检测金属标记

结构规格: PBT 塑料外壳，8×8×25mm 尺寸，2 米 PVC 柔性线缆出线 | 检测参数: 2mm 槽宽，横向浸入深度 5~7mm (典型 6mm)，金属检测专用 | 输出规格: NAMUR 两线制，额定电压 8.2V，Ri≈1kΩ，工作电压 5~25V DC

2mm 槽宽安全型 NAMUR 电感槽形传感器，SIL3 本安防爆，5kHz 高频，-40℃~100℃宽温金属检测

结构规格: PBT 塑料外壳，8×8×25mm 尺寸，500mm LiY 柔性线缆出线，2.5g 轻量化设计 | 检测参数: 2mm 槽宽，横向浸入深度 5~7mm (典型 6mm)，适配 5×8×0.5mm 铝制检测目标 | 输出规格: 安全型 NAMUR 两线常闭，额定电压 8.2V (Ri≈1kΩ)，工作电压 5~25V DC

3.5mm 槽宽电感式槽形传感器，NAMUR 两线常闭，SIL2 本安防爆，3kHz 响应金属检测

结构规格: PBT 塑料外壳，8×8×25mm 尺寸，500mm LiY 柔性线缆出线，轻量化设计 | 检测参数: 3.5mm 槽宽，横向浸入深度 5~7mm (典型 6mm)，适配 10×7×0.3mm 铝制检测目标 | 输出规格: NAMUR 两线常闭，额定电压 8.2V (Ri≈1kΩ)，工作电压 5~25V DC，开关频率 0~3000Hz

5mm 槽宽电感式槽形传感器，NAMUR 两线常闭，SIL2 本安防爆，2kHz 响应金属检测

结构规格: PBT 塑料外壳，10×8×15mm 尺寸，500mm LiY 柔性线缆出线，轻量化设计 | 检测参数: 5mm 槽宽，横向浸入深度 5~7mm (典型 6mm)，适配 15×8×0.5mm 铝制检测目标 | 输出规格: NAMUR 两线常闭，额定电压 8.2V (Ri≈1kΩ)，工作电压 5~25V DC，开关频率 0~2000Hz

30mm 圆柱型超声波传感器，80-2000mm 测距，4-20mA/0-10V 双模拟输出，M12 五针连接

结构规格: M30 圆柱型，不锈钢 (1.4305/AISI 303) 外壳，170g 重量，M12×1 五针连接器 | 测量参数: 单头漫反射式，80-2000mm 检测距离，约 180kHz 换能器频率，重复精度≤0.1% 满量程 | 输出规格: 4-20mA 电流输出 (≤500Ω)，0-10V 电压输出 (≥1000Ω)，响应延时最小 65ms (出厂 195ms)

倍加福单端 M12 直头 A 型 4 针母头连接器，2 米灰色 PVC 线缆，IP68/IP69 防护

结构规格: M12 直头母头，A 型编码 4 针，2 米灰色 PVC 线缆，CuSn 接触体，黄铜镀镍外壳 | 电气参数: 额定电压 30V DC，额定电流 4A，接触电阻≤10mΩ，绝缘电阻≥10⁹Ω，电压降≤3V | 环境参数: 工作温度 - 40℃~90℃，存储温度 - 40℃~100℃，防护等级 IP66/IP68/IP69

倍加福单端 M12 直头 A 型 4 针母头连接器，2 米灰色 PUR 线缆，IP68/IP69 防护，耐油耐磨

结构规格: M12 直头母头，A 型编码 4 针，2 米灰色 PUR 线缆，CuSn 接触体镀金，黄铜镀镍外壳，4.8mm 线径 | 电气参数: 额定电压 30V DC (最大 250V AC/DC)，额定电流 4A，接触电阻≤5mΩ，绝缘电阻≥10⁹Ω，线芯截面积 0.34mm²(19×0.15mm) | 环境参数: 工作温度 - 40℃~90℃，存储温度 - 40℃~100℃，防护等级 IP66/IP68/IP69，耐微生物与水解

M12 直 A 型 4 针现场接线母头，螺丝端子适配 4-6mm 线缆，IP67 工业自由布线连接器

接头结构: M12 直母头 A 型编码 4 针，螺丝端子接线 | 电气参数: 额定 4A/250V，触点镀金，绝缘电阻≥10⁹Ω | 环境防护: IP67 防护，工作温度 - 40℃~85℃，UL94 V0 阻燃

倍加福单端 M12 直头 A 型 4 针母头连接器，5 米灰色 PVC 线缆，IP68/IP69 防护

结构规格: M12 直头母头，A 型编码 4 针，5 米灰色 PVC 线缆，CuSn 接触体镀金，黄铜镀镍外壳，4.8mm 线径，线芯截面积 0.34mm²(19×0.15mm) | 电气参数: 额定电压 30V DC (最大 250V AC/DC)，额定电流 4A，接触电阻≤5mΩ，绝缘电阻≥10⁹Ω，测试电压 1500V AC (50Hz/1min) | 环境参数: 工作温度 - 40℃~90℃，存储温度 - 40℃~100℃，防护等级 IP66/IP68/IP69，阻燃等级 IEC 60332-2-2

倍加福 M12 弯头 A 型 4 针母头连接器，5 米灰色 PVC 线缆，IP68/IP69 防护，直角布线更灵活

结构规格: M12 弯头母头，A 型编码 4 针，5 米灰色 PVC 线缆，CuSn 接触体镀金，黄铜镀镍外壳，4.8mm 线径，线芯截面积 0.34mm²(19×0.15mm) | 电气参数: 额定电压 30V DC (最大 250V AC/DC)，额定电流 4A，接触电阻≤5mΩ，绝缘电阻≥10⁹Ω，测试电压 1500V AC (50Hz/1min) | 环境参数: 工作温度 - 40℃~90℃，存储温度 - 40℃~100℃，防护等级 IP66/IP68/IP69，阻燃等级 IEC 60332-2-2

M12 直角 A 型 4 针母头预制线，5 米 PUR 高柔线缆，IP68/IP69 防护，适配拖链与动态弯曲场景

接头结构: M12 弯型母头，A 型编码 4 针，5 米灰色 PUR 线缆 | 电气参数: 额定 4A/250V，镀金触点，绝缘电阻≥10⁹Ω | 环境防护: IP68/IP69 防护，工作温度 - 40℃~90℃，耐化学腐蚀

M12 直角 A 型 4 针现场接线母头，螺丝端子适配 4-6mm 线缆，IP67 防护，工业狭小空间自由布线连接器

接头结构: M12 弯型母头，A 型编码 4 针，螺丝端子接线，适配 4-6mm 线缆 | 电气参数: 额定 4A/250V，触点镀金，绝缘电阻≥10⁹Ω，接触电阻≤5mΩ | 环境防护: IP67 防尘防水，工作温度 - 40℃~85℃，UL94 V0 阻燃

M12 直头 A 型 5 针母头预制线，2 米 PVC 线缆，IP68/IP69 防护，适配工业传感器静态布线场景

接头结构: M12 直型母头，A 型编码 5 针，2 米灰色 PVC 线缆，线芯 5×0.34mm² | 电气参数: 额定 4A/48V AC/60V DC，镀金触点，绝缘电阻≥10⁹Ω，接触电阻≤5mΩ | 环境防护: IP68/IP69 防护，主体 - 40℃~90℃，固定安装 - 40℃~80℃，阻燃 UL94 V-2

M12 直角 A 型 5 针母头预制线，2 米 PVC 线缆，IP68/IP69 防护，适配狭小空间多信号静态布线场景

接头结构: M12 弯型母头，A 型编码 5 针，2 米灰色 PVC 线缆，线芯 5×0.34mm² | 电气参数: 额定 4A/48V AC/60V DC，镀金触点，绝缘电阻≥10⁹Ω，接触电阻≤5mΩ | 环境防护: IP68/IP69 防护，主体 - 40℃~90℃，固定安装 - 40℃~80℃，阻燃 UL94 V-2

M8 直头 A 型 4 针单端母头预制线，2 米 PUR 屏蔽线缆，IP68 防护，适配工业传感器静态 / 动态布线场景

M18金属外壳，红外光，检测距离达17m，适用于长距离物体检测

检测范围: 0 ... 10 m（极限17 m） | 光源类型: 红外LED | 工作电压: 10 ... 30 V DC

倍加福ENI90PL增量编码器，采用BlueBeam技术，高精度转速测量，坚固耐用，适合恶劣工业环境。

外壳直径: 93 mm | 最大脉冲数: 1024 | 工作电压: 4.75...30 V DC

倍加福TVI50N系列增量编码器，结构紧凑坚固，采用光电采样技术，提供精确的转速与位置反馈信号。

检测类型: 光电采样 | 工作电压: 4.75...30 V DC | 最大脉冲数: 1024

NBN8-12GM50-E2-V1电感式接近传感器，非齐平安装，检测距离8mm，适用于金属物体的非接触式检测

额定工作距离: 8 mm（非齐平安装） | 工作电压: 6 ... 36 V DC | 输出类型: PNP，常开（NO），3线

ENI58IL系列增量编码器，采用高精度BlueBeam光电技术，坚固空心轴设计，提供精准位置与速度反馈。

外壳/轴径: 58 mm / 10 mm 空心轴 | 分辨率: 1024 PPR | 工作电压: 4.75...30 V DC

ENI90PL增量编码器，集成BlueBeam技术，空心轴设计，适用于高精度转速与位置反馈控制。

外壳直径: 93 mm | 最大脉冲数: 1024 PPR | 工作电压: 4.75...30 V DC

M18金属外壳，红外光，检测距离达500mm，坚固耐用。

检测范围: 0 ... 500 mm | 工作电压: 10 ... 30 V DC | 输出类型: 1路PNP，常开/常闭可调

对射型光电传感器，红外光，检测距离达17米，坚固金属外壳，抗环境光干扰。

检测范围: 0 ... 10 m（极限17 m） | 光源类型: 红外 LED | 工作电压: 10 ... 30 V DC

漫反射型光电传感器，红外光，检测距离200mm，坚固金属外壳，检测距离可调，抗环境光干扰。

检测范围: 0 ... 200 mm | 调整范围: 30 ... 200 mm | 光源类型: 红外光

电感式接近传感器，齐平安装，检测距离15mm，传感器头双向可旋转，适用于金属物体检测。

额定工作距离: 15 mm（齐平安装） | 输出类型: NAMUR，常闭（NC） | 额定电压: 8.2 V（Ri约1kΩ）

电感式接近传感器，非齐平安装，检测距离30mm，NAMUR输出，传感器头双向可旋转。

额定工作距离: 30 mm（非齐平安装） | 输出类型: NAMUR，常闭（NC） | 额定电压: 8.2 V（Ri约1kΩ）

电感式接近传感器，齐平安装，检测距离8mm，适用于金属物体的非接触式检测。

额定工作距离: 8 mm（齐平安装） | 工作电压: 10 ... 30 V DC | 输出类型: PNP，互补输出，4线

P+F Pepperl+Fuchs Inductive Proximity Sensor, Standard Cylindrical Metal Sensing.

Switch Function: Normally Open (NO) | Output Type: PNP | Output Type: 3-wire

Pepperl+Fuchs introduces a single-turn absolute encoder with PROFIBUS-DP bus communication, designed for high-precision industrial positioning and motion control applications.

Communication Protocol: PROFIBUS-DP (DP-V0/DP-V1) | Operating Power Supply: DC 10…30 V | Maximum Speed: 12000 rpm

The IC-KP2-1HB17-2V1D is a multi-function RFID control interface unit designed for data acquisition and transmission in industrial automation, built for installation in harsh industrial environments.

Dimensions: 137 × 62 × 42 mm | Operating Voltage: 20-30 V DC | Operating Temperature: -25 ... 70 °C

Positioning via distance sensor with millimeter precision, PRT, measurement range up to 150 m, SSI/RS-422 interface, M12 connector

Light Source: Modulated Visible Red | Laser Class: 1 | Measurement Method: Pulsed Ranging Technology (PRT)

R2000 SD, 2-D LiDAR sensor for simple measurement and positioning tasks, with object detection range up to 25 m

Light Source: Modulated Infrared | Resolution: 1 mm | Power Consumption: < 10 W

Designed for tight installation spaces and harsh industrial environments; ideal for positioning, counting, and limit detection of metal workpieces on automated production lines.

Switching Frequency: Max 440Hz | Operating Voltage: 10～30VDC | Operating Temperature: -25℃～+85℃

Withstands high-pressure washing and harsh industrial environments; ideal for automation scenarios requiring simultaneous detection of two switch states.

Switching Frequency: Max 150Hz | Operating Voltage: 10～30VDC | Operating Temperature: -25℃～+85℃

Uses electromagnetic induction for non-contact metal detection; ideal for harsh industrial environments and high-pressure washdown applications.

Switching Frequency: Max 440Hz | Operating Voltage: 10～30VDC | Shock Resistance: 30g (11ms)

Withstands high-pressure washing and harsh industrial environments; ideal for positioning, counting, and limit detection of metal workpieces in explosive hazardous areas (requires use with safety barriers).